Print-On® Black Silicone Ink

All inks are 10:1 mix ratio

Drying
Heat creates adhesion; Print-On Silicone Ink® can be dried at
• 250°F (121°C) for 5 minutes with standard ink drier.
• 300°F (149°C) for 3-4 minutes also works for most applications

Applications include
Wire and Cable ~ Silicone wrist bands ~ Silicone tubing ~ Keypads ~ Silicone swim caps ~ Silicone electronic covers ~ Spraying ~ Textile ink ~ Screen printing ~ Pad printing

Technical Bulletin: Print-On Silicone Ink Technical Bulletin

Safety Data Sheet

FOR INDUSTRIAL/PROFESSIONAL USE ONLY. 

For your project you may also need:

• Mixing Cups and Sticks