This platinum-cured, blue Silicone Putty has a Shore Hardness of A45 (similar to the hardness of a pencil eraser). Check out our Hardness Comparison Chart for more information.
The mix ratio by volume is 1 Part A : 1 Part B. While wearing vinyl or nitrile gloves, combine proper amounts of Part A and Part B and then fold and knead the two components by hand until a uniform color is reached and there are no visible streaks. Once thoroughly mixed, apply the putty to a properly prepared model.
The working time of this product is approximately 4 minutes and the demold time is approximately 30 minutes.
This is an addition cure (platinum catalyzed) system. As such, it can be heat accelerated and is subject to inhibition by the usual factors which include (but are not limited to) sulfur, sulfur compounds and amines.
Technical Data Sheet: Magikmold® Silicone Putty