Magikmold® SP-250 Pink Silicone Putty

Magikmold^® SP-250 Pink Silicone Putty is an easy-to-use, platinum-cure silicone putty designed for the manufacture of simple, but detailed flexible molds. Putties are great for small to medium-scale mold making projects, including hobby and craft, model making, and some architectural restoration projects.

The mix ratio by volume is 1 Part A : 1 Part B. While wearing vinyl or nitrile gloves, combine proper amounts of Part A and Part B and then fold and knead the two components by hand until a uniform color is reached and there are no visible streaks. Once thoroughly mixed, apply the putty to a properly prepared model.

The working time of this product is approximately 4 minutes and the demold time is approximately 30 minutes.

You can also purchase this product in Shore A45 (Blue).

Physical Properties

CURE INHIBITION: Contamination from amines, sulfur, tin compounds, polyester resins, some paints and some silicone rubbers may inhibit surface cure of this product. Perform a test cure on an identical surface to determine that complete curing and good release are obtained. DO NOT wear latex rubber gloves when handling this product – cure inhibition may occur.

Product Literature

Technical Bulletin: Magikmold^® Silicone Putty

Safety Data Sheet: Magikmold^® SP-250 Pink Silicone Putty Safety Data Sheet