Category Archives: Blog

Worlds Finest Paste Wax Mold Release

DON’T GET STUCK IN A MOLD FINISH KARE 1000P HI-LOW PASTE WAX WILL STOP SILICONE FROM STICKING TO YOUR MOLD BOX The Finish Kare 1000P Hi-Low Paste Wax contains a blend of synthetic waxes that are good general release agents for epoxies, urethanes, rubbers, acrylics and ceramics. Finish Kare 1000P Hi-Low Paste Wax is also great for applying to […]

How To Choose RTV Silicone When Making Resin Casting Molds

(Tin or Platinum Cure) by Silicone Specialist Steve Levine I’m going to talk about why you need to choose tin or platinum when buying silicone for mold making but first you should know tin cure is also known as “condensation cure silicone” and platinum cure is also known as “addition cure silicone”.

Learn How To Print On Silicone Rubber Wristbands

Printer Dan thought printing on silicone rubber wristbands with traditional inks would be child’s play. He mixed his ink, applied the design to his parts and when the ink dried he had beautiful looking imprints on the part. Printer Dan packaged the customized silicone pieces and shipped them to his customers all over America.

Top 4 Moisture Sources That Ruin Resin Castings

If you’re not careful you can contaminate urethane resin which leaves bubbles and/or foam in your molded parts. Find out common sources of contamination to urethane resin and ways to avoid them in this article.

Now You Too Can Print With Silicone Ink

Now You Too Can Print With Silicone Ink on Wrist Bands, Swim Caps, Cell Phone Holders Every once in a while you come across a technology that is simple and well-timed. Printing onto a silicone part seems to mystify most. But now; color filled silicone wrist bands are routinely printed through a heat process using […]

More Information About Silicone Mold Making

Silicone Mold Making with silicone rubber is well know for being the best way to create molds or fossils that are long lasting and strong. While the process of silicone mold making is similar to mold making with liquid latex, silicone creates a more flexible highly enduring mold. The main reason while molders continue to […]